Cart

General Formulations Concept 238 MotoMark Armor

$363.92$650.33

Description

General Formulations Concept 238 MotoMark Armor

General Formulations Concept 238 MotoMark Armor
12.0 mil Flexible UV Gloss Clear Calendared Vinyl Protective Overlaminate.
• Offers excellent UV and abrasion protection with exceptional clarity and durability.
• Recommended for protecting graphics used on ATV’s, snowmobiles, motocross bikes, power sport vehicles, helmets, watercraft, and carts.
• Designed for use as a protective overlaminating film for the GF Concept 235 MotoMark 4 Mil Grip.

https://www.generalformulations.com/getattachment/48e0921e-7f08-434a-b080-91e207f47f83/MotoMark-Info-Sheet.aspx

MotoMark™ 12.0 mil “ARMOR” Clear UV Overlaminate

Concept®
238 MotoMark™ 12.0 mil “Armor” is a flexible gloss clear calendared vinyl offering, UV protection. This film is
designed for use as a protective overlaminating film on the 235 MotoMark™. Recommended for the powersport, graphic and
decal markets. This product is formulated for exceptional clarity and durability.

Applications Concept ® 238 MotoMark™ is intended for use as the overlaminating film on Concept®
235
MotoMark™ 4.0 mil “Grip”. This overlaminate and vinyl combination is used for a variety of
Quads, Snowmobiles, Motocross, Powersport Vehicles, Helmets and Carts. The adhesive
system is formulated to adhere to most common solvent, eco-solvent, latex, thermal, UV,
offset and screen inks. However, specific formulations must be tested before use. Some ink
may contain excessive flow additives that could reduce adhesion of this product. Testing is
always suggested before production. Specifically test applications to gas tanks.

Thickness Film 12.0 mils
Adhesive 1.8 to 2.2 mils
Liner 4 mils.
(Thickness variation +/- 10%)

Temperature Ranges Minimum application temperature +40°F.
Service temperature -40°F to +200°F.
Expected Exterior Exposure 5 Years under normal exposure conditions and proper care.

Adhesion To stainless steel 40 oz/in.
Tested according to PSTC-101 Method A with 24-hour dwell at 70°F and 50% relative
humidity. Typical values. Individual values may vary. Test thoroughly before production.

Water Resistance Excellent
Humidity Resistance Excellent
Storage Stability One year shelf life when stored at 70°F and 50% relative humidity.

Product Code 238-15 15”x 75’ 238-24 24”x 75’
238-30 30”x 75’ 238-54 54”x 75’
238-60 60”x 75’

Recommendations: Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent
penetration resulting in vinyl degradation. Always thoroughly test this product to confirm that it meets your
requirements. Proper preparation of plastic surfaces requires cleaning with alcohol or acetone to remove
contaminates before application. Failure to prepare the surface can cause premature failure of the
graphic or decal.

The above recommendations for these products usage does not suggest or constitute a verbal or written
guarantee or warranty by the manufacture or its dealers of this product. Individual purchasers or users
shall be responsible for determining the materials suitability as well as its intended use and application.

Additional information

Size

, , ,

Brands

Product Type

,

Thickness

Color

Surface Finish

Reviews

There are no reviews yet.

Be the first to review “General Formulations Concept 238 MotoMark Armor”

BCI Offers SAME DAY FREE SHIPPING On All Regular Sized Items From all Distribution LocationsDistribution Locations