3M Scotchlite Removable Reflective Graphic Film with Comply Adhesive Series 680CR-81 Lemon Yellow

$250.00$3,313.00

Clear

Description

3M Scotchlite Reflective Graphic Film Series 680CR-81 Lemon Yellow

This 7-mil, enclosed lens, retroreflective, engineer grade film offers flexibility and versatility. It has a similar daytime and nighttime appearance that retains most of its reflectivity when wet.
  • Available in numerous colors, including black (which reflects white)
  • Excellent angularity
  • Pressure-activated adhesive for easy sliding and tacking
  • Removable with heat
  • For vertical, flat, curved or corrugated surfaces, with or without rivets
  • Air release channels for fast and easy, bubble-free graphic installation



http://multimedia.3m.com/mws/media/504359O/ij680cr-scotchlite-removable-graphic-film.pdf

http://multimedia.3m.com/mws/media/538421O/680cr-scotchlite-comply-reflective-positionable-removable.pdf

http://multimedia.3m.com/mws/media/464493O/farleys-sathers-case-study.pdf

http://multimedia.3m.com/mws/media/451274O/3m-graphics-warranties-brochure.pdf

Product Description
• For Screen Printing
• 7-mil, enclosed lens, retroreflective, engineer grade films that offer flexibility and versatility
Product Features
• Available in 11 colors, including black (which reflects white)
• Similar daytime and nighttime appearance that retains most of its reflectivity when wet
• Excellent angularity
• Pressure-activated adhesive for easy sliding and tacking
• Removable with heat and/or chemicals
• For vertical, flat, curved or corrugated surfaces, with or without rivets
• Air release channels for fast and easy, bubble-free graphic installation
• Expected Performance Life of 9 years for Vehicle application (unwarranted period for unprinted film with no graphic protection, applied to a
flat, vertical, outdoor surface)
• Expected Performance Life of 7 years for Rail application (unwarranted period for unprinted film with no graphic protection, applied to a flat,
vertical, outdoor surface)
Recommended Types of Graphics and End Uses
• Vertical commercial vehicle, railcar, and bus graphics
• Vertical non-regulated signs and striping
• Vertical indoor and outdoor signage
When constructed and used as described in this Bulletin, these types of graphics and end uses may be warranted by the 3M™ MCS™ Warranty.
Please read the entire Bulletin for details.
i IMPORTANT NOTE
Some substrates such as under-cured polyurethane paint, fiberglass, and some paint systems may continue to outgas for some time.
Two-part polyurethane paints and screen print clears may stop curing when the air and surface temperature are lower than 75 F (24
C). This film is not recommended for use on stainless steel.
Recommended Compatible Products
See 3Mgraphics.com/warranties for a complete list of compatible products that are approved by 3M for use with the base film covered in this
Bulletin and used for the creation of a graphic that may be eligible for the 3M™ MCS™ Warranty.
Screen Printing Inks for 3M™ MCS™ Warranty
• 3M™ Screen Printing Ink Series 1900 (Solvent), line color and four color
• 3M™ Scotchlite™ Screen Printing Ink Series 2900 (Solvent)
• 3M™ Screen Printing UV Ink Series 9800, line color and four color
Product Bulletin 680CR
Release S, Effective December 2015 (Replaces R, Feb ‘14)
with Comply™ Adhesive Series 680CR Quick Links
3M Graphics Warranties
Warranty Period Tables for 680CR
Technical Information Selector
Safety Data Sheets (SDS)
Flammability (ASTM E84 Reports)
Videos
Some of these links lead to web-based resources
that are not product-specific.
3M Removable Reflective Graphic Film Scotchlite ™ ™
2 Product Bulletin 680CR Release S
Graphic Protection
• 3M™ Scotchcal™ Luster Overlaminate 8519
• 3M™ Screen Print Gloss Clear 1920DR
• 3M™ Screen Print UV Gloss Clear 9740i
• 3M™ Screen Print UV Gloss Clear 9800CL
Application Tapes
See 3M Instruction Bulletin AT-1 to determine what application tape is recommend for your film or finished graphic.
Characteristics
These are typical values for unprocessed product. Processing may change the values.
Physical Characteristics
Characteristic Value
Material Vinyl
Thickness With adhesive: 7–8 mil (0.18–0.20 mm)
Film Color
At -4 entrance angle and 0.2 observation angle.
Film Number Color Name Typical Coefficient of Retroreflection
680CR-10 White 100
680CR-14 Orange 20
680CR-64 Gold 70
680CR-71 Yellow 65
680CR-72 Red 20
680CR-75 Blue 10
680CR-76 Light blue 10
680CR-77 Green 20
680CR-81 Lemon yellow 75
680CR-82 Ruby red 15
680CR-85 Black 30
Retroreflection Definition
The typical coefficient of retroreflection defined is measured at a -4 entrance angle and a 0.2 observation
angle. It is expressed in candlepower per foot-candle per square foot (candela/lux/square meter) per ASTM
E810.
The entrance angle is formed by a light beam striking the surface at a point and a line that is perpendicular to
the surface at the same point.
An observation angle is formed by the light beam striking the reflective surface and returning to the observer.
From 800 feet (249 meters), a motorist normally views a graphic at a 0.2 angle.
Adhesive Pressure-activated, slideabe with air release channels
Adhesive Color Clear with silver underneath
Liner Polyethylene-coated paper
Safety Standards See “Health and Safety” on page 7 for ASTM, NFPA® and AAR information
Flammability Call 1-800-328-3908 for information
Product Bulletin 680CR Release S 3
3M Removable Reflective Graphic Film Scotchlite ™ ™
Application Characteristics
Warranty Information
Warranty Coverage Overview
The warranty coverage for eligible graphics is based on the user both reading and following all applicable and current 3M Graphics Product and
Instruction Bulletins. The warranty period for eligible graphics is as stated in the 3M Graphics Warranties Matrices, found at 3Mgraphics.com/
warranties, at the time that the film was purchased. The warranty period may be reduced and stipulations may apply for certain constructions
and applications, as covered in this Bulletin.
The warranties set forth in this Bulletin are made in lieu of all other express or implied warranties, including any implied warranty of
merchantability, fitness for a particular purpose, or arising out of a course of dealing, custom, or usage of trade.
3M Basic Product Warranty
3M Graphics Products are warranted to be free of defects in materials and manufacture at the time of shipment and to meet the specifications
stated in its applicable 3M Graphics Product Bulletin and as further set forth in the 3M Graphics Warranties Bulletin.
Limited Remedy
The limited remedy applicable to each warranty is addressed in the 3M Graphics Warranties Bulletin found at 3MGraphics.com/warranties.
Limitation of Liability
Except to the extent prohibited by law, 3M SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO PURCHASER OR USER FOR ANY DIRECT
(EXCEPT FOR THE LIMITED REMEDY PROVIDED HEREIN), INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, LABOR, NON-3M MATERIAL CHARGES, LOSS OF PROFITS, REVENUE, BUSINESS, OPPORTUNITY, OR GOODWILL) RESULTING
FROM OR IN ANY WAY RELATED TO 3M’S GRAPHICS PRODUCTS, SERVICES, OR THIS BULLETIN. This limitation of liability applies regardless of
the legal or equitable theory under which such losses or damages are sought.
Warranty Period Matrices – Unprinted Film
See the 3M Graphics Warranties Matrices at 3MGraphics.com/warranties, for vertical warranty period information specific to your film.
Warranty Period Matrices – Screen Printed Film
See the 3M Graphics Warranties Matrices at 3MGraphics.com/warranties, for vertical warranty period information specific to your film.
Characteristic Value
Finished Graphic Application
Recommendation
Substrate type: aluminum, Fiberglass Reinforced Plywood (FRP), paint
Graphic Orientation: Vertical only
Application method: Dry
Application temperature: air and substrate
• Flat without rivets: 40–100 F (4–38 C)
• Flat, curved or corrugated surfaces with rivets: 45–100 F (7–38 C)
Adhesion, Typical
24 hours after
application
Aluminum 4.8 pounds/inch (0.86 kg/cm)
FRP (Fiberglass Reinforced Plywood) 3.7 pounds/inch (0.7 kg/cm)
Painted aluminum panels 2.6 pounds/inch (0.5 kg/cm)
Temperature Range After
Application -30 to +200 F (-34 to +93 C) (not for extended periods of time at the extremes)
Graphic Removal Removable with heat and/or chemicals from most substrates within specified warranty
period.

 

680CR-71 Yellow, Miscellaneous Sizes
3M ID 75000109985 UPC# 00000000000000
680CR-71 Yellow, 48 in x 50 yd
3M ID 75030089660 UPC# 00051135163313
680CR-81 Lemon Yellow, Miscellaneous Sizes
3M ID 75000110074 UPC# 00000000000000
680CR-81 Lemon Yellow, 48 in x 50 yd
3M ID 75030089710 UPC# 00051135163368

Additional information

Media Type

,

Brands

Adhesive Type

Size

, , , , , , ,

Product Type

Thickness

Applications

, ,

Surface Finish

Punched Type

Free Shipping Same Day oversized items excludedDistribution Locations